Anna Burris Futon, 2017-09-30 23:27:48. Metal futon frames are constructed from hollow metal tubes. The arms are hollow and pocket welds are welded onto these arms with which to attach stretcher rails. Steel hinges are attached to the inside of the arms and hollow metal seat and back racks are connected to the hinges using regular screws. The problems start in the seat section. The hollow tubes and spot welded bars that make up the foundation of the seat section are prone to breaking loose off of the seat section. The spot welding is not sufficient enough to keep these bars from breaking loose and are a result of the low cost approach of building these decks. Another issue that results from the hollow tube of the seat section is that it is prone to bending from normal use. The hinges that are attached to the arms suffer the same fate as over time customers have brought these in to stores showing them bent out.
Edith Carter Futon, 2017-11-08 05:23:51. The design of the futon cover is also important. The cover should have a zipper three-quarters of the way around. This ensures that you can get the cover on and off easily. Many covers skimp on the zipper opening in order to keep the price down. It is worth an extra $50 to get a better design. After the first time you struggle to put on the cover, you will wish that you had coughed up the extra cash.
Natasha Potts Futon, 2018-04-03 06:22:43. When investigating a futon frame consider these three things: 1) Hardwood will tends to be stronger than pinewood, 2) Solid wooden cross members will tend to outlast jointed cross members and 3) The More reinforcement the better. Most modern wood futon frames have six major parts; a left arm, a right arm, a back deck, a seat deck, and two stretcher rails (sometimes called cross rails). The hardware that fasten all of these wooden pieces together are most often made up of an ingenious bolt and barrel nut (dowel nut) system that act very much like little vice clamps that hold the joints in place. This makes futon frames easy to assemble and disassemble which can have many advantages.
Lynnette Rutledge Futon, 2018-02-07 01:54:22. Futon frames that have slats that are 2.5\" wide should have at least twelve slats on the seat and twelve on the back for a total of 24 slats. Futons with 1.75\" slats should have at least 15 slats on the seat and 15 slats on the back for a total of 30 slats. If the slats are any thinner or if the respective futon you are considering has less slats than indicated here, you might want to ask why.
Natasha Potts Futon, 2018-02-07 16:41:30. One of the best improvements you will notice that you now have in the latest futon styles and designs that you can now choose from is the craftsmanship. Even if you have previously bought a futon in the past during your college days, you are sure to be pleasantly surprised by the excellent breakthroughs in the craftsmanship that is applied to these new designs. While you can still find some very simple and basic designs that feature the traditional box shaped frames, which definitely provide excellent options for those of you on a more restricted budget, there are now many other designs available that feature some very intricate and detailed designs.
Edith Carter Futon, 2018-02-07 13:04:59. A good quality finger jointed cross rail might be just as strong as a solid cross rail in many ways, it still accepts a downward pressure that can force poor quality joints to loosen. Experience shows that a solid continuous hardware cross rail is less likely to break than a segmented one. If the futon you are considering buying has segmented stretcher rails, ask the dealer to explain the history of that manufacturer's products with this system. Ask if a cross rail does fail, what the dealer's policy is about replacement. Although, most dealers generally will not pay for shipping, they should at least offer the replacement part for free with in the span of the warranty.
semangat Futon, 2018-02-07 18:29:00. A furniture like this is is constructed with slats and cotton mattress, three to six inch thick. This thick mattress is firmer than ordinary mattresses, thus this is basically good for your back, especially if you are the type of person who sits in front of the computer all day and suffer from back aches when you get home.
Edith Carter Futon, 2018-02-06 09:55:52. Futon frames that have slats that are 2.5\" wide should have at least twelve slats on the seat and twelve on the back for a total of 24 slats. Futons with 1.75\" slats should have at least 15 slats on the seat and 15 slats on the back for a total of 30 slats. If the slats are any thinner or if the respective futon you are considering has less slats than indicated here, you might want to ask why.
Cecilia Velazquez Futon, 2018-02-05 22:50:59. Most futon frames come in one of two basic configurations, either a bi-fold or tri-fold design. Bi-fold frames are those that only fold a single spot within the mattress support frame, essentially creating two equal halves. Frames that incorporate this type of mattress support are arguably the most common throughout the world. Tri-fold designs, by comparison, utilize two separate hinge points, thereby creating a mattress support with three separate sections. These three section designs are most often used in the construction of \"loungers\" (which resemble a chaise lounge), but they can also be found in the more basic sofa configurations as well. Most reputable furniture retailers will be able to provide you with futons in both of these two base configurations.
Etta Mayo Futon, 2018-02-05 09:40:03. Another early futon design patent was filed in 1985 (Patent Number 4642823) assigned to Robert Fireman's Furniture Gallery, Inc. invented by William B. Wiggins. What was interesting about this early take on futon design was the incorporation of arms on the sides of the futon which allowed the seat and back sections to integrate into the arms and allow for operation without having to rearrange the futon. This early design featured two pivoting swing pieces attached from the back rails into the back section. The seat and back sections were connected together using steel pins. What I found most interesting about this design is that it effectively converted the futon from sofa to bed from the front. Once in the bed position additional legs were extended down for support. Additionally a dowel and rod interlocked with the seat and back section to safely lock the two in a horizontal position. This design would be considered a bi-fold by today's standards which means that 2 sections are used to create the seating and sleeping portions of the frame itself.
Natasha Potts Futon, 2018-02-06 06:21:11. Futons can also be made from a variety of materials, although wood and metal are typically the most commonly used. The decision to choose one over the other is really a matter of personal preference than anything else. Wood tends to be a \"warmer\" material and is often preferred by those that like a more traditional aesthetic to their furniture and home décor. And because wood can be easily stained, chances are one can easily find the right hue to match any existing furniture. Metal frames are most often used in contemporary design styles, as well as for many of the less expensive futons. Steel and aluminum tend to be the most commonly used metals because they are both easily shaped and are extremely durable. Furthermore, metal can be painted to match any existing décor or color scheme.
Anna Burris Futon, 2018-02-08 00:35:53. If you are tired of dragging your big and heavy furniture like sofa and bed every day just to get a space where you can roll your sleeper sofas on the floor, a two in one furniture like futon is perfect for you. More and more people are discovering the advantage of having a multi purpose furniture inside their house. This type of multi purpose sleeper sofa is a revolutionary type of furniture that saves so much space in your room as it can be converted for specific use.
Any content, trademark’s, or other material that might be found on the Streatchforming website that is not Streatchforming’s property remains the copyright of its respective owner/s. In no way does Streatchforming claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.