Anna Burris Futon, 2018-04-20 04:19:49. There are also excellent photographs online to get ideas from. Futons allow you to use fewer pieces of furniture in the home for maximum functionality. They are also better on bad backs than traditional mattress and box spring sets usually are. This is due to the firm mattress being thinner and keeping your spine straighter during the night.
Georgia Henderson Futon, 2017-10-14 04:05:50. Most specialty futon retailers pay little to no attention to black metal futon frames. Retailers I've spoken to have said that the black metal futon frame is the number one service headache when it came to futons with over 95% of service issues being the failure of a black metal frame component. Replacing these parts were made more difficult by the fact the manufacturers were located overseas and obtaining the parts past the 90 day warranty period often involved the retailer having to purchase the replacement parts and charging the customer.
Lynnette Rutledge Futon, 2017-12-04 08:00:08. There are many types of modern day futons nowadays. The different variety of bed couches are usually seen in the frames, materials used, and its cover. The different material found in these futons makes it possible for them to be sold with different prices. You would need to remember that you would be using these bed couches day and night, and buying cheap ones with low quality material would only subject you to product degradation faster than you expect it to be. It is more profitable to buy decent to good quality futons with great durability so you can use it for a long time despite a rather high price.
Peggy Santos Futon, 2017-12-03 21:29:14. When the futon industry was born back in the 1980's, the frames were well thought out and well constructed. Whether it was softwoods or hardwoods, the frames featured good fundamental designs made from solid wood. These futon frames would incorporate new working mechanisms and ideas in operation that made futons appealing not only in their design but in the quality of materials and construction that went into them. The futon industry was doing well and growing with these frames heading into the 1990's but then the black metal futon frame came onto the scene.
Lynnette Rutledge Futon, 2017-12-05 18:36:50. The problems that exist in the futon industry however result from specific manufacturers wanting to take a low end, low price approach to building products that can be retailed in the big box stores at the lowest price possible. Metal futon frames have long been a staple of being \"the\" mass merchant offering in futons as a category. Unfortunately many consumers purchase these frames as an introduction to the futon category of furniture and were quite disappointed by the quality and construction of these made to hit a price point futons. The problems of metal frames reside in several design issues.
Peggy Santos Futon, 2017-12-03 23:34:23. In December 1991 Thomas L. Meade submitted a convertible furniture frame patent (Patent Number 5170519) that did not use arms in its design for assisting conversion of the futon but a hinges and stops arrangement. The seat and back sections incorporated pieces of lumber beneath them to act as supports. There were two of these used on each section that when laid down in a bed position would rest on these supports. The genius in this design was its ability to pivot on a set of nylon wheels located towards the lower back of the seat section supports. All one has to do was tilt the frame back on the wheels which would put the back rest on the floor and pull the seat section up to unlock it and lower it down into a bed position. This design was simple, functional and easy to operate without the need for arms on the ends of the frame to help in the futons conversion.
Anna Burris Futon, 2017-12-05 19:14:02. Metal futon frames are constructed from hollow metal tubes. The arms are hollow and pocket welds are welded onto these arms with which to attach stretcher rails. Steel hinges are attached to the inside of the arms and hollow metal seat and back racks are connected to the hinges using regular screws. The problems start in the seat section. The hollow tubes and spot welded bars that make up the foundation of the seat section are prone to breaking loose off of the seat section. The spot welding is not sufficient enough to keep these bars from breaking loose and are a result of the low cost approach of building these decks. Another issue that results from the hollow tube of the seat section is that it is prone to bending from normal use. The hinges that are attached to the arms suffer the same fate as over time customers have brought these in to stores showing them bent out.
Peggy Santos Futon, 2017-12-04 06:50:31. Most futon frames come in one of two basic configurations, either a bi-fold or tri-fold design. Bi-fold frames are those that only fold a single spot within the mattress support frame, essentially creating two equal halves. Frames that incorporate this type of mattress support are arguably the most common throughout the world. Tri-fold designs, by comparison, utilize two separate hinge points, thereby creating a mattress support with three separate sections. These three section designs are most often used in the construction of \"loungers\" (which resemble a chaise lounge), but they can also be found in the more basic sofa configurations as well. Most reputable furniture retailers will be able to provide you with futons in both of these two base configurations.
Lana Duke Futon, 2017-12-04 23:39:27. After explaining this to people many come to understand the nature of why futons have been given a bad name because of the import black metal futon frame and are open to at least trying out the possibilities of higher-end models. Futon shops or specialty sleep stores carry a wide selection of proven wood futon frames and often have anywhere from half a dozen futon mattresses or more to choose from all made from quality materials.
Faith Booth Futon, 2017-12-03 08:00:32. Another issue the black metal frames suffered from were bending stretcher bars or rails. Again the hollow nature of these strecther rails presented issues with breakage and bending. Early designs involved a steel tooth design that would fit into pocket welds on the arms. These would snap off over use. The alternative design was to run a bolt through the arms and into the rails. While better it still did not address the issue of bending stretcher rails.
semangat Futon, 2017-12-03 09:33:55. If you want to learn how to incorporate futons with high end design, there are many magazines and websites that offer ideas on high end decorating and interior design. The best way to decorate a room if you do not have a lot of decorating skill is to hire an interior decorator or imitate what you see in the photographs that look best to you. There are few hard right and wrong answers when it comes to decorating your own home. If it looks good to you, then that is what is important.
Any content, trademark’s, or other material that might be found on the Streatchforming website that is not Streatchforming’s property remains the copyright of its respective owner/s. In no way does Streatchforming claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.